On 04/24/2015 11:50 AM, William Stillwell wrote:
To plug a Fluke pod with a pga package to a board with PLCC ? ie, PGA68 -> PLCC68 ? ( in this case a 80186 )
William Stillwell
Hamster / KI4SWY
Stillwell Software Solutions.
Free Play Florida Arcade & Pinball Show Organizer
All I can think of is using one of the cheap PLCC Eprom adapters as a starting point... There are a few on eBay, but they seem to start around $75. John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/