YES!! Need that USB to be vertical maybe if there are a bunch of them... I *will be happy* to write software for it if needed and you want... I like UI's so an open source .NET app would make that thing Niiiiice! Drag and Drop, real time monitoring, byte editing, Im happy to be a proto tester. In my world Im currently in 28-pin land to.... 2764-27256... so I may need to wait for the next generation. 😊 -----Original Message----- From: Techtoolslist <techtoolslist-bounces@flippers.com> On Behalf Of techtools-steve Sent: Friday, July 19, 2019 12:24 PM To: Technical Tools Mail List <techtoolslist@flippers.com> Subject: Re: [Techtoolslist] EPROM Emulator Questions Maybe something like this little guy Jess? https://i.imgur.com/K8tsyhm.png I've been using a handful of these for a couple of years now on Atari vector boards without issue. This photo is the earliest prototype and supports 2516/2716/2532/2732. It's good for development but was really designed as a solution for long term eprom replacement than as an emulator.  A small upgrade could possibly shift this to full "emulator" supporting more aggressive development work. On 7/19/2019 8:00 AM, Jess Askey wrote:
My vision is that I could have 8 of them plugged into all the EPROM sockets on a board like this.. 😊 Then I can live debug!
[cid:image002.jpg@01D53E10.77CC3C50]
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/