That did it! Thanks for the quick response. I had one pin that was cut in half and thought it was making a good connection. I soldered on a little bit of an extension and now pod passed self test. Does anyone repair these? I have 6809 that might need some help. I would have to test it a little bit more to make sure. On Monday, July 6, 2015 2:11 PM, William Stillwell <wkstill@franz-family.com> wrote: Did you make sure the CPU cable was secured in the texttool slot on the pod? William Stillwell Hamster / KI4SWY Stillwell Software Solutions. Free Play Florida Arcade & Pinball Show Organizer -----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Theron Troxel via Techtoolslist Sent: Monday, July 6, 2015 3:02 PM To: Technical Tools Mail List Cc: Theron Troxel Subject: [Techtoolslist] Fluke 68000 Pod Problem Just got a 68000 and tried to self-test and comes back with "POD SELF TEST 68000 FAIL 00". Any help with this error? Also, does anyone fix Fluke Pods? _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/