At 2:00 AM -0500 12/24/06, Mark Hooks wrote:
I just picked up a couple of 9100s with problems. One hangs up in memory test. I'm thinking it may not have the dip switch settings set up right. I've searched and searched but can't find the settings in the documentation. I'd appreciate it if someone could send them to me or point me to a manual that has them.
The second one doesn't even get that far. It hangs up with no display and the Run UUT and Disk Access LEDs lit. Any ideas on how to get these running would be appreciated.
Mark Hooks
If you have the CPU extension service board you can test the 9100s with a working unit and a 68000 pod. I believe Art (fromny) has these 9100 series extension cards in stock - they normally came with the unit when it was bought, but they tended to separate over time... John :-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist