On September 6, 2018 10:24:06 AM PDT, John Robertson <jrr@flippers.com> wrote:
On 2018/09/05 11:10 PM, Tony Jones wrote:
That was proposing a network card for the 9100 - perhaps that could be built using the same idea as the wi-fi mod for the 9010A? Steve was referring to the labeling on the rear panel of the 9100FT, next to the expansion card opening (blocked off). It is marked "10 base 2 [ground symbol] LAN IEEE802.3 10 base 5". His assumption, I believe, was that it was for some kind of networking card.
I have a 9100FT here (serial HM040) and it has no text evidence of a missing LAN port on the back or anywhere. I also looked through the list of Fluke accessories (on TTL) and was unable to find any reference to this card. Perhaps it was on the Fluke Wish List?
Of course my FT may be a factory cobbled together machine as the cabinet and front panel look identical to my 9100As and that could explain the missing label referenced elsewhere...
John :-#)#
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
My reading was that the labels had been added by someone, and it wasn't screened on the metal. I've examined four 9100s (two A, two FT), and have never seen anything like this.