On September 6, 2018 10:24:06 AM PDT, John Robertson <jrr@flippers.com> wrote:

On 2018/09/05 11:10 PM, Tony Jones wrote:
 That was proposing a network card for the 9100 - perhaps that could be built
 using the same idea as the wi-fi mod for the 9010A?
 Steve was referring to the labeling on the rear panel of the 9100FT,
 next to the expansion card opening (blocked off).  It is marked "10
 base 2   [ground symbol]    LAN  IEEE802.3    10 base 5".    His
 assumption, I believe, was that it was for some kind of networking
 card.

I have a 9100FT here (serial HM040) and it has no text evidence of a 
missing LAN port on the back or anywhere. I also looked through the list 
of Fluke accessories (on TTL) and was unable to find any reference to 
this card. Perhaps it was on the  Fluke Wish List?

Of course my FT may be a factory cobbled together machine as the cabinet 
and front panel look identical to my 9100As and that could explain the 
missing label referenced elsewhere...

John :-#)#