[Techtoolslist] Data I/O 29B and Unipak 2B problem loading RAM from serial port and Promlink

When I load RAM from Master, the PROMs burn fine. When I load RAM from a disk file, it stops at 100% and says 'Waiting on programmer...' (or very similar words to that effect) and sits there until I cancel it. Any ideas? Promlink appears to be controlling the 29B fine because verifies, burns, etc from a master PROM work fine. Any ideas? _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist