Hi, Can someone direct me to a working unserialized version of 6.1 ? So far, I tried these three image sets and used Samdisk 3.8.11 to copy them on a floppy. They all gave me the same error during installation. ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9100%20Series/System_DiscsRV6.1_VerifiedOK/ https://github.com/ieure/fluke-9100-disk-archive/tree/master/9100-SYSTEM-V6.... https://github.com/ieure/fluke-9100-disk-archive/tree/master/9100-SYSTEM-V6.... Thanks ! Marc ________________________________ De : John Robertson <jrr@flippers.com> Envoyé : 16 mars 2020 12:02 À : Marc Desfossés <mdesfoss@hotmail.com> Objet : Re: [Techtoolslist] Fluke 9100A - Cannot boot from system disks On 2020/03/16 8:59 a.m., Marc Desfossés wrote:
Thank Steve. I did that yesterday and the machine works fine. Just not sure what is going on with the disk/image.
I will try with a Gotek to see if the drive is the problem.
Marc
Most disc images are serialized - they are specific to the machine and can't work on others! I should probably pull them, but someone might be interested in defeating that bit. The 6_1 that is up has had the serial number test disabled (as I recall)... John :-#)#
________________________________ De : Techtoolslist <techtoolslist-bounces@flippers.com> de la part de Steve Larkins <steve@ukaudiovisual.co.uk> Envoyé : 16 mars 2020 11:50 À : Technical Tools Mail List <techtoolslist@flippers.com> Objet : Re: [Techtoolslist] Fluke 9100A - Cannot boot from system disks
Hi Marc A member on here uploaded a V6_1 image to the FTP which is complete and ready to go. it is located here: ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9100%20Series/v6_1-Disk_Image.rar
Unzip it and use winimage to write it to your SD card..
On Sun, 15 Mar 2020 at 17:10, Marc Desfossés <mdesfoss@hotmail.com> wrote:
Hi,
I am trying to setup a 9100A unit. The initial hard disk was defective. I had a "missing hard drive" error message.
I've upgrade the roms to the V5 version and setup a SCSI2SD drive. I was able to format the disk with service disk 1.4
Whenever I try to boot from the system disks (tried original disks 4.1, images from 6.0 and 6.1), I get an error:
Error 243 loading /dd/rom/appl
I can skip it but then then I get more errors:
root: appl missing root: Can't start application Path Name not found
And the unit freezes at Initializing system.
Error 243 is a CRC error based on the documentation. The floppy drive seems fine since I can load service disk 1.4. I thought that I did not restore the images properly but since I also get the error with original 4.1 disks, I am not sure what I can try next.
Did anyone have had a similar problem ?
Thanks
Marc
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- John's Jukes Ltd. MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3 Call (604)872-5757 (Pinballs, Jukes, VideoGames) flippers.com "Old pinballers never die, they just flip out" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/