#1 There are two copies of the tape data on the ftp site: ftp://ftp.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010A%20Tapes/sig-a.h 13.5k in size; referenced here: http://seven.pairlist.net/pipermail/techtoolslist/2011q2/001031.html and ftp://ftp.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010%20scripts/SA-ASYNC.H 8.1k in size; referenced here: http://seven.pairlist.net/pipermail/techtoolslist/2016q1/002344.html John; this second one that you uploaded is bad and should be removed. According to the source, subprograms 12-18 are BINARY but all that is present in the file for all 7 subprograms is ":1A@@$$ :5350$A3" where 1A is the subprogram identifier, @@ is the subprogram number and $$ is the checksum. sig-a.h appears to contain valid binary data. #2 Using the first image (sig-a.h) I still can't get the self-test procedure detailed on pages 2-12, 2-13 and 2-14 of the 006 operation manual to pass. I've tried now on two different systems (with different clock modules). Each time all I get is "signature 0000 count 255" The manual is marked as "2nd preliminary version" ftp://ftp.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010_Fixture%20PDFs/9000A-006%20Async%20Probe1.pdf Several possible reasons: a) The saved sig-a.h image is also bad. I actually have an NOS tape but of the eleven 9010s I've had, none have a working tape to read it on ;-( b) The manual is incorrect. This is possible. On page 2-14 it says "set the data delay to 4" but there is no such option in the setup. Does anyone have a newer copy? c) I'm not correctly interpreting the resistor hook up instructions on page 2-13. Image of what I'm doing attached. thanks for any help!! _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
