Marc Desfossés <mdesfoss@hotmail.com> writes:
Hi Ian,
I am using samdisk on a Windows 2000 PC to write images on disks. The floppy drive is HD.
I write them using this commandline. It worked for disks such as the service disk 1.4.
samdisk copy STREAM A:
The disks I am using are double density disks that were brand new. They actually came with the Fluke and have a Fluke sticker on them.
I did read the README where you explain some problems writing with HD drive and media. I also tried formatting the disks with the 9100A first as suggested in the README with no luck.
Are you burning your images with samdisk or dtc ?
I usually write them with dtc these days, but have used ImageDisk in DOS with success as well. It sounds like your media may be faulty, even though it was unused. -- Ian _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/