I removed the rs-232 card, and reseated it. No change. I'm using windows xp, however this reset, or time out as it acts like happens even when unplugged. I've had one report that the fluke waits in receiving mode when unplugged which mine is not doing. So it's looking like maybe something wrong with the rs-232 card. when I plug an rs-232 checker onto the Fluke it shows LD High, and RTS, DTR low. Kevin On Tue, Jan 5, 2010 at 2:30 AM, Peter Matthews <peter.matthews@pmm.org.uk>wrote:
What operating system are you using? I had a great RS232 link for some years with windows XP. With Vista I got problems similar to yours. I discovered that FIDE does not work in Vista and the program was not compiling. Please check that you have no error messages at the end of the compile stage. I solved it by running FIDE in virtual machine XP. Regards Peter
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Danny Pearson Sent: 04 January 2010 20:16 To: 'Technical Tools Mail List' Subject: Re: [Techtoolslist] 9010a RS232 problem?
Hi Kevin, make sure the RS232 card is firmly seated. I had issues which I resolved by reseating it a bit more firmly and screwing it down tight.
Cheers,
Dan
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Kevin Moore Sent: 03 January 2010 21:18 To: jrr@flippers.com; Technical Tools Mail List Subject: Re: [Techtoolslist] 9010a RS232 problem?
It's not a pod problem, I can use the fluke normally w/o problem. I'm trying to hook up the rs232 to a computer to upload scripts. It only resets after hitting enter/yes after doing an Aux/if, read. while trying to send a script to the fluke.
I've been trying to read up on the program to test the rs-232, but I've not programed the fluke manually before, so It get's a little confusing manually entering the program.
I have checked the power supply for problems etc when I first got it about 6 months ago.
On Sun, Jan 3, 2010 at 2:28 PM, John Robertson <jrr@flippers.com> wrote:
Kevin Moore wrote:
Ok the holidays are over, and I'm back to trying to get my Fluke hooked up to the computer so I can do scripts.
Problem I'm having is that when I enter the following Aux/if , Read , Yes the fluke resets after 1-2 secs.
It will also do this with the serial port unplugged.
I'm wondering if the is a normal action, like the Fluke is looking for a signal from the com port to wait, or if there is a problem with my fluke..
Thanks,
Kevin
Try leaving a pod hooked up in Self-Test and leave it running for a while
the machine should not reset...
If it does then something may well be wrong with the 9010 and I would check the power supply first - looking for failing caps is the first item on the check list.
John :-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- I am using the free version of SPAMfighter. We are a community of 6 million users fighting spam. SPAMfighter has removed 27020 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len
The Professional version does not have this message
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/