Keven, also, Re: "I have a 9010, with pods, and I'm hoping this unit will do more for me." Sadly, Unless you want to start learning how to program TL/1 , it will actually do Less.. as nobody has reverse engineered the Fluke Signature routines on the 91XX series yet, so the only way to get signatures is from good working test hardware that you then can compare against other gear. There is a CRC32 TL Script, but you will need a Monitor and Video Card? (maybe, i am not sure if you can run the CRC script from Floppy ) Tony, what about the 9110FT ? I have one of these that collects dust ( as i primarily use my my 9100FT ) William Stillwell Board Member - Inspiration labs, Inc. a 501c3 organization Board Member & Co-Founder - Byte Amusement Group // Free Play Florida Arcade & Pinball Show a 501c3 organization Member of MakerFX - a 501c3 organization Former Board Member - West Central Florida Group - a 501c3 Organization. On Mon, Mar 1, 2021 at 9:03 PM Tony Jones <tony@tonyjones.com> wrote:
On Mon, Mar 1, 2021 at 4:50 PM Kevin Moore <talon.k@gmail.com> wrote:
the RTC is dead,
Expose the battery terminals on the chip and solder on an aux battery cell (google; lots of threads on this). Or take your chances with Chinese replacement chips, _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/