Can you send me a picture of one of these? I am curious how they set it up. I haven't actually seen any of these in action (though I do have a unit and a couple cards). -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Simon Hanlon Sent: Tuesday, February 28, 2012 9:19 AM To: jrr@flippers.com; Technical Tools Mail List Subject: Re: [Techtoolslist] Kurz Kasch PDFs updated on Flippers I have some kk blank proto cards that could be reproduced fairly easily. In addition to Johns fuse tip, it's worth changing/ testing the caps in the main unit , 3 of my units had bad caps. When I have minute I will check to see if I have any of the missing Documents. Sent from my iPhone On 28 Feb 2012, at 16:13, John Robertson <jrr@flippers.com> wrote:
Ideally one would make a universal card - like the VERO boards but with the 0.1" (?) 100 pin connector and the rest of the board full of plated through holes...
http://www.verotl.com/prototyping-products
Then if folks scan their cards on both sides (or photo) someone can draw up the wiring.
As I seem to have the largest single collection I'll be scanning/photographing them this spring with my work experience students. I'll leave it to someone else to do the wiring though, I have way too many projects to finish that are needed to pay bills. I will post the pictures on flippers though as they are done.
I have replacement 100 pin wire wrap sockets for the test fixture for sale if anyone needs one.
I also recommend that you fuse the transformer secondaries to avoid burning cards or edge connectors if a problem occurs (don't ask).
John :-#)#
David Shoemaker wrote:
Has anyone thought about reproducing some of these? --------------------------------------------------------------------- --- From: david grohowski Sent: 2/28/2012 4:00 AM To: jrr@flippers.com; techtoolslist@flippers.com Subject: Re: [Techtoolslist] Kurz Kasch PDFs updated on Flippers
I just noticed that you don't have listed 396A, which is Midway MCR series power supply. I'll check if I have the instructions, but I do have (2) of the cards.
david grohowski electronicamuse@aol.com
-----Original Message----- From: John Robertson <jrr@flippers.com> To: techtoolslist <techtoolslist@flippers.com> Sent: Tue, Feb 28, 2012 2:12 am Subject: [Techtoolslist] Kurz Kasch PDFs updated on Flippers
I've updated the PDFs lately and have packed them all into a single PDF if you prefer to download as one file.
Have almost the entire collection now!
http://www.flippers.com/kurzkasc.html
John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/