Phil,. I've used the 8080 pod on the 2 board and it works fine. I got that error once with one of the clock signals being bad by a broken trace. Evidently, the pod check out all the powers and the clock signals going in for integrity. Now, I have a Z80 pod with a uut power fail on a galaga, but all the signals are looking good at the socket. John, do you have a definite to look for why the uut power fail or pod timeout errors, what causes them? Thanks Tony --- Phil Morris <phil@morris0.fsnet.co.uk> wrote:
I have a Fluke 9010A with an 8080 pod - said combination works fine with every '3-layer' Taito Space Invaders boardset that I've used it with, but if I try it on *good, working* 'L-shaped' Taito boards I get the error:
UUT Power Fail
This has me puzzled - why should the Fluke work fine with one type of boardset, yet not the L-shaped set, even though said L-shaped sets work perfectly with an 8080 in the CPU socket?
Thanks, Phil
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist