Mine is much older, I can't advise you...the 465...only one gauge. Need to upgrade! John :-#(# At 04:28 PM 25/07/2002 -0500, Noel Johnson wrote:
I have the 467, which is almost identical to the 490, with three gauges (one for each color).
According to an old setup chart, adapter 6 is used with the Electrohome G05 tube - Sylvania 19VARP4 A budy of mine tried it and says he burned out the guns of two tubes. We know his B&K is working well, as he's rejuvinated over 20 color tubes with fantastic results. Is adapter 6 the right one for the B&W vector tubes?
Thanks, Noel
John Robertson wrote:
Which B&K model do you have?
I have made a simple adapter that I cut into the cable and straight wired the plug off an old tube onto. I have found that ALL our tubes (except the B&W) use the same plug if they are the large diameter. Thus with a small plug and a couple of permanent cables I can cover the tubes we are likely to run across. I use a jumper wire to connect the Red/Green/Blue cathodes to the B&W/Red wire for testing. These tubes all are in-line and all colours share the same G1 (& G2 is the same as well).
John :-#)#
At 03:33 PM 25/07/2002 -0500, Noel Johnson wrote:
I just learned to use my B&K. Could someone confirm that adapter 23 is used on Nintendo Sanyo monitors? I don't have the current setup list from B&K.
Thanks in advance!
Noel