[Techtoolslist] Fluke 9100 Woes, Memory Dip Settings Needed

I just picked up a couple of 9100s with problems. One hangs up in memory test. I'm thinking it may not have the dip switch settings set up right. I've searched and searched but can't find the settings in the documentation. I'd appreciate it if someone could send them to me or point me to a manual that has them. The second one doesn't even get that far. It hangs up with no display and the Run UUT and Disk Access LEDs lit. Any ideas on how to get these running would be appreciated. Mark Hooks _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist