An RTC problem was reported on the 1st quarter and 3rd quarter of 2018. I assume that I could have an additional problem, since I am unable to go forward and simply input time and date, and restore the boot process. The current version on the EPROM is ver 1 And U36 is also version 1 Any help would be greatly appreciated Kevit On Tue, 15 Mar 2022 at 20:42, Kevit Desai <kevitdesai@gmail.com> wrote:
The RTC battery failed on my 9100FT, upon replacement , i get the following error: real time clock not initialized. I am unable to access keys or the disk and floppy drive. I am aware that such problems have been posted in the past. I would very much appreciate to know how to recover the boot process. And the steps to taken.. many thanks, and I look forward to hearing from you and being part of the community.
--
Regards, Kevit Desai Tel: Mobile: +254 722 517067
--
Regards, Kevit Desai Tel: Mobile: +254 722 517067 _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/