Hey Guys, I'm bound and determined to get my Berzerk working again. Currently I have it working to the point that the game will boot however the game will freeze randomly. List of things I have done: New sockets on the ZPU-1000 with new EPROMs and Z80 processor New ram sockets on the VFB-1000 and I have 4164 ram and 4116 ram that I'm looking into putting onto the VFB-1000. The BSC-1000 color board is fine, and the cleanest board I have on the machine. When I go to do the short ram check on my Berzerk board set, the 0-7FF fails, however the second one, 1000-17FF if I remember passes correctly. If anyone knows any tips or tricks with using the Fluke 9010a with a Berzerk board set I would appreciate it. Thanks Grant _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/