Re: [Techtoolslist] Fluke 9010A Input voltage

Be careful, a lot of times when you change voltage you also should change the fuse. In the case of the 9010A the line fuse should be 1A fast blow for 120 V and 1/2 A fast blow for 240 V. Filip Hautekeete wrote:

Hello Steve,

You are correct. Thanks to John Robertson I figured out there is a slide card for voltage selection behind the fuse panel. No need to drag the systems out of your garage ;-)

Thanks for your help!

Filip

_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist