Kevin Moore wrote:
Ok the holidays are over, and I'm back to trying to get my Fluke hooked up to the computer so I can do scripts.
Problem I'm having is that when I enter the following Aux/if , Read , Yes the fluke resets after 1-2 secs.
It will also do this with the serial port unplugged.
I'm wondering if the is a normal action, like the Fluke is looking for a signal from the com port to wait, or if there is a problem with my fluke..
Thanks,
Kevin
Try leaving a pod hooked up in Self-Test and leave it running for a while - the machine should not reset... If it does then something may well be wrong with the 9010 and I would check the power supply first - looking for failing caps is the first item on the check list. John :-#)# _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/