I can confirm the version below works on my Dell PIII-700 and XP. Is your cable OK? You do need a specifically wired cable as shown in the Data I/O manual and to set the baud rate (going from my memory here) to 9600 N 8 1. Also, is the serial port enabled in your BIOS? Best Regards, Bill -----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Arcadeforever Sent: Monday, November 26, 2007 9:08 PM To: Technical Tools Mail List Subject: Re: [Techtoolslist] Data I/O 29B on XP? Works fine for me too, download the version from mikes arcade.com On Nov 26, 2007 3:44 PM, Joseph Magiera <joemagiera@ameritech.net> wrote:
Can anyone confirm that they can interface with a Data I/O 29B using a PC running Windows XP?
I finally am going to try to get my Data I/O going, and I plan on using a Pentium III, 500mg PC, loaded with Windows XP. A pretty unpowerful computer by today's standard, but should be plenty for running the Data I/O software (if it can indeed work on XP).
Any tips or tricks to note on installing/running? Thanks,
Joe joemagiera@ameritech.net
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
-- Wayne Moore _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist