Matt, While we're on the subject, one last favor to ask. Which adapter for a WG7000 series 19" monitor, please? Tube model is Philips MVR48ABK05X. It has a smaller neck than the typical 19" raster tube. Any help appreciated! Noel Matt Rossiter wrote:
510UTB22 is the tube number and yes it uses adapter 23. Heater voltage should be 6.3
Matt
-----Original Message----- From: owner-techtoolslist@www.flippers.com [mailto:owner-techtoolslist@www.flippers.com]On Behalf Of Noel Johnson Sent: Thursday, July 25, 2002 2:03 PM To: TechToolsList@flippers.com Subject: Re: Which B&K adapter to use for Nintendo?
Thanks Matt!
Well the only sticker on the tube (which is out of a DK) is in Japanese, but it has these numbers on it:
M2B178819 510UTB22
Hope this helps...
Regards, Noel
Matt Rossiter wrote:
If you give me the model # of the tube I can tell you. Usually it's 23 or 24.
Matt
-----Original Message----- From: owner-techtoolslist@www.flippers.com [mailto:owner-techtoolslist@www.flippers.com]On Behalf Of Noel Johnson Sent: Thursday, July 25, 2002 1:33 PM To: TechToolsList@flippers.com Subject: Which B&K adapter to use for Nintendo?
I just learned to use my B&K. Could someone confirm that adapter 23 is used on Nintendo Sanyo monitors? I don't have the current setup list from B&K.
Thanks in advance!
Noel