Hi Dave, One problem I found with the tape drives is the drive belt. You should be able to pick a similar belt at a TV/VCR repair shop. You will need to take the drive with you to size it. If anyone needs one and can't find it I am willing to make a run to my local wholesaler and pick up a pack of them, but there is a charge for that part as a result...time... You can also remove the tape drive and set it on top of the 9010 to see if it works and run the tests as covered in the Fluke service manual that is stored on http://www.spies.com/arcade/TE/index.html (Thanks to Al Kossow for archiving this!) John :-#)# At 06:53 PM 06/02/2002 +0000, Dave Langley wrote:
Since my tape drive does not work I really need to get a replacement for it or fix it. Has anyone ever repaired a fluke 9010 tape drive?
I'm still looking for an RS232 card too ...
Dave Langley www.robotron-2084.co.uk
To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request@flippers.com. Please direct other questions, comments, or problems to jrr@flippers.com.