On Dec 7, 2015 9:30 PM, "Andrew Welburn" <andy@andysarcade.net> wrote:
The provided image works on the 9100A and 9100FT running a compactflash adapter of various types (Aztecmonster, Spyrus) plenty of people have found it to work. As it was built for a compactflash setup, i'm not entirely surprised it doesn't work for an SD card. Its likely your adapter configuration is the main issue.
I'm sure it works perfectly for CF. Nothing to the contrary was implied. Previously you said it came from an original Fluke HD and now "it was built for a compact flash setup". Are you able to elaborate on the exact process of conversion?
I'm running V1.3 and have not changed them, because nobody has come up with a later dumped chip. For reasons that should be obvious, don't put a 9100A bios chip in the 9100FT :)
Yes, that seems rather obvious :)
Sorry, your previous post was talking about 5.0 roms for an entirely different machine (the 9100A).
Sorry but I think you misread/understood what I said previously. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/