As I recall the Fluke code is the same for the 6800 and 6502 pods, perhaps you just enable either the upper or lower half of the Eprom to select which pod the system thinks you have? Might be a project to make an adapter that converts back and forth... John :-#)# On 11/08/2013 10:49 AM, William Stillwell wrote:
I am not sure there is a combo version?
Here is the link to convert a 6800 to 6502
http://forums.arcade-museum.com/showthread.php?t=217476
-----Original Message----- From: techtoolslist-bounces@flippers.com [mailto:techtoolslist-bounces@flippers.com] On Behalf Of david grohowski Sent: Friday, November 08, 2013 11:18 AM To: jrr@flippers.com; techtoolslist@flippers.com Subject: [Techtoolslist] 6800 to 6502 pod combo ROM?
Is this up for d/l anywhere?
thx
david grohowski electronicamuse@aol.com _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/