I have successfully run all Atari boards with the 6502, and 6809 pods. Generally I do a Run UUT @0 I never type in 0000 Don't know if that makes a difference. Kevin On Tue, Feb 19, 2013 at 9:02 PM, Clay Cowgill <c.cowgill@comcast.net> wrote:
We have seen a failure of a 6502 pod such that the address driver line was "weak" and couldn't always drive successfully drive the pin above the TTL threshold. That same pod would pass its own self test, presumably because the loopback inputs of the pod have higher impedance than the target board address lines. Perhaps something like that is happening here?
Out of curiosity, has anyone successfully run Tempest from the 6502 pod? I never had any trouble using one to poke around in memory and test stuff (way back with the Tempest multigame), but my Tempest machine would never 'run' from the 9010. Tried a couple different CPU's and maybe even a 9005, but I only had one 6502 pod... Never really knew if it was just my machine, the pod or both...
-Clay
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/