Here: ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9100%20Series/Service%20Disc%206/ John :-#)# On 11/06/2016 8:19 AM, John Robertson wrote:
The zipped disk image is now on the Fluke directory under Service Disk 6.
Thanks to Ian for releasing this!
John :-#)#
On 11/05/2016 9:26 PM, Ian Eure wrote:
It's in ImageDisk format.
On Nov 5, 2016, at 9:08 PM, Andrew Welburn <andy@andysarcade.net> wrote:
what format is the floppy disk image in so we can write a new physical one?
Andrew Welburn http://www.andys-arcade.com
On 06/11/2016 11:32, Ian Eure wrote: I sent the disk image to John, hopefully it’ll be up on the FTP soon.
My patch eliminates the serial number check entirely. It sounds like the disks were shipped in a clean state, then had some data written back onto them, but I’m not completely clear on that. If that’s the case, it should be harmless, since the check itself is what I changed, not the serial number.
On Nov 5, 2016, at 7:18 PM, Ian Eure <ieure@icloud.com> wrote:
I'll be sharing the disk image a bit later, but wanted to get the news out.
The last thing I need for my 9100 setup is a keyboard or PS/2 adapter... anyone have one they'd let go?
On Nov 5, 2016, at 6:52 PM, William Stillwell <ki4swy@gmail.com> wrote:
oh please share!!! i would to configure mine to support all of the ram installed in it.
William Stillwell
Hamster / KI4SWY
Free Play Florida Arcade & Pinball Show Organizer
> On Sat, Nov 5, 2016 at 9:10 PM, Ian Eure <ieure@icloud.com> wrote: > > I cracked the protection on the v6 service disk. Took a few > hours of > digging this afternoon. It booted right up on the first attempt. > > > > > _______________________________________________ > Techtoolslist mailing list > Techtoolslist@flippers.com > https://pairlist7.pair.net/mailman/listinfo/techtoolslist > FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment > Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ > ______
-- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist