Has anyone spotted a script for using the probe to identify an address of the trace one is touching? For example probe a select line and find the range that select is active for. Define the address range, then monitor the trace and identify the particular address or the range. Data lines would be an obvious sub-set as well as IO lines. If not, any 9100 folks interested in working to make it? This would be for sharing on TTL. Thanks! John :-#)# John’s Jukes Ltd. www.flippers.com _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/