Hi, I tried the Gotek with hxc firmware and and hfe image files (Thanks Tony !!) I still get an error on system disk 2. It's a different error this time. I tried both 6.1 and 6.0 images. Error 205: /dd/rom/level1 Looking at the OS-9 doc, here is what it means 205: ILLEGAL MODULE HEADER - The specified module cannot be loaded because its module sync code is incorrect. I was able to skip it and this time I was able to boot the system from the disk. Could it be the floppy controller logic that is problematic ? Marc ________________________________ De : Techtoolslist <techtoolslist-bounces@flippers.com> de la part de Tony Jones <tony@tonyjones.com> Envoyé : 17 mars 2020 13:13 À : Technical Tools Mail List <techtoolslist@flippers.com> Objet : Re: [Techtoolslist] Fluke 9100A - Cannot boot from system disks On Tue, Mar 17, 2020 at 10:05 AM Tony Jones <tony@tonyjones.com> wrote:
If I were you (since you have the temporary workaround of using the ftp HDD image) I'd just install a Gotek and be done with floppies.
I should add, that if you go this route you'll need to convert the git repo to a format suitable for the Gotek. I batch converted the entire repo to HFE a while ago, if anyone wants this, drop me a line. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/