ok, i figured out the power conversion, and the wiring setup, made some photos too, Jon - feel free to put this onto the FTP in the BK directory :) http://www.andysarcade.net/pix/BK490convert.JPG enjoy! Andrew Welburn http://www.andys-arcade.com On 10/07/2014 17:01, Andrew Welburn wrote:
hi all..
I have a B&K 490, that i got in the UK, but now i've moved to the USA i need to run it on 110v...
http://www.andysarcade.net/pix/DSC_2706.JPG
The label indicates it may be switcahble internally between the two voltages.. but i opened it up and stuff is not easy to get to..
The schems in my manual only show 117vAC input, not even the 234v stated..
So.. anyone else done this? anyone seen both taps? i dont want to pull it apart further without knowing its actually possible, the frame is quite compacted with stuff.
thanks!
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/