I have a 9100 for spare parts... I could use a 9105 to maybe resurrect it William Stillwell Hamster / KI4SWY Stillwell Software Solutions. Free Play Florida Arcade & Pinball Show Organizer -----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Tony Jones Sent: Wednesday, November 11, 2015 6:00 PM To: techtoolslist@flippers.com Subject: [Techtoolslist] Fluke 9105
From reading the manuals, the 9105 has two floppies, no hard drive and is non-programmable. being designed to run programs developed on the 9100.
Is the lack of programmability just due to the missing HDD and perhaps different software load? I looked at the service manual hoping to find out if the SCSI interface is a card or on the mainboard but it didn't say. I guess I'm curious if it's possible to convert a 9105 to a 9100. This said, I'm guessing the 9105 generally did not come with a graphics card? Related question; what from a 9105 is useful - from a spare parts perspective - for a 9100. Thanks Tony _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/