At 04:07 AM 2/26/00 -0500, you wrote: Thank you all for your sugestions:-) I have now solved the problem (that never was) :-( to explain I wanted to write the script files and save them on my PIII so first i wrote a file on the Fluke. and downloaded it to the PIII but in reading the manual I used the option AUX/IF then PROG this lists the programs stored in flukes memory to the RS232 port and any device conected to it (eg a printer) or to a file. As it says---- it LISTS it ---as an ascii stream.The problem with this is when you go to upload the file back into the fluke it is in the wrong format!!!!! Silly me I should have read further (somehow I never did get on with manuals :-() ) the answer is to use the AUX/if then SAVE commands it then saves it to the PIII in a format that can be uploaded. the downside is you cannot use the PIII to write the script file in the first place. still you can't win them all and I'm glad to have a safe way of storing the files (Don't like the idea of only having them on cassette as they are not reliable in my opinion). thanks again to all who helped. regards Pete (invadar)
Pete,
My suggestion is to delete the offending line and see if the machine accepts the file. If it does then there must be a syntax error in that line. Keep us posted.
Joe
At 02:32 AM 2/26/00 +0000, you wrote:
I have been writing some script files for my fluke 9010a in order to trouble shoot some 'Universal boardsets that I have (eg:- cosmic monsters etc.)
The problem is I only have One Tape. so i decided to download the scripts to my pentium III portable.
No Problem downloaded perfectly :-))
trouble is when i try to upload them back to the fluke always at line 7 fluke sends an error message (Scriptfile about 110 lines long) and aborts sadly the message it gives is the abiguous message AUX-Receiving-ERROR discribed as 'Miscellanious Transmission Problems'????
Can anyone sugest anything I might try.
I am sending to the pc with BAUD 9600 , PARITY=NONE , BITS=1 and Xon Xoff protocol as I say no problem sending to the pc.
When Scriptfile and Signature Analysis is complete will post it for the use of the list members.
Thanks in advance
Pete Davies (Invadar)
To UNSUBSCRIBE from techtoolslist, send a message with "UNSUBSCRIBE" in the message body to: techtoolslist-request@flippers.com. Please direct other questions, comments, or problems to jrr@flippers.com.