Hi Chaps I have a Konami board (Gryzor / Contra) to troubleshoot, getting a garbage screen. I've removed the old 63C09E CPU and replaced with another from a donor board and its nicely socketed. There is some better activity on the Address Bus now (some of the lines were floating on the CPU) Can I safely use this 63C09E CPU in the 6809 Fluke 9000A Pod ?? .... It's Supposed to be pin and instruction set compatiable. If not I'll use a 6809E and at least I'll be able to do some basic tests. Thanks, Colin _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/