I've got a few drives here.. The main problem I'm having with the pc drives is that most manufacturers are removing the switches or even the ability to change the DS0/DS1 settings. The drives I have are.. 720k Mitsumi D357T2 (amiga) 720k Chinon fb-354 (amiga) PC 1.44m Panasonic JU-257A606pc (loads of unpopulated switches) TEAC FD-235HF-7291 (uses 0 ohm smt resistors as jumpers..) TEAC FD-235HF-7291 (slightly different model with different jumper positions smt again) and the drive I tested it with as it had a DS0/DS1 jumper which is a Sony MPF920-F Chris ----- Original Message ----- From: "Rodger Boots" <rlboots@cedar-rapids.net> To: "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Monday, May 02, 2005 11:17 AM Subject: Re: [Techtoolslist] Replacing a Fluke 9100a disk drive
Assuming your problem IS the drive and not the controller, what PC drive make/model are you trying to use?
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist