Quick update.... I've bought a Zif Socket and some bits and bobs to make a decent adaptor up - Thanks Guys.... ----- Original Message ----- From: "Tim Matthews" <trmatthe@gmail.com> To: "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Tuesday, June 08, 2010 9:49 PM Subject: Re: [Techtoolslist] Fluke Pods to Turned Pin Sockets - Help !! That's the drawback with this approach, but a) I was lucky and found some non-RoHS ZIFs that were being sold off cheap and b) even at £35 it's cheaper than buying a sacrificial pod to nick bits from :) I did find a source of 64pin sockets in 0.9" width suitable for 68k for under £1 each in multiples of 10. I think it was RS and need to refind the link so I can order some more. tim/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/