I have a sealed original tape. However in ten 9010s I've owned I've never had a working tape drive. I'm not sure who uploaded that fluke-async.txt script but (I'm on vacation right now and it's too hard to navigate the ftp site via tablet) my recollection is there are multiple other copies of the main control script on the ftp site (.s files, I know there is also a full tape uploaded by John the one with corrupt binaries) and they are the same. My opinion has always been the the preliminary operators manual documentation is wrong though I'll admit the fact that the delay option (program 10) is mentioned in the training PDF is odd. On Tue, Jun 19, 2018, 12:28 AM Matthew Rossiter <matt@rossiters.com> wrote:
Actually - looking at this a little further - that option never existed on this tape. There's no option to setup delay compensation at all and no Program 10 that is ever called to execute. So perhaps an older version.
http://games.rossiters.com/manuals/Fluke/Tapes/fluke-async.txt.
Anyway - I wonder if there are other versions floating around somewhere? The self-test setup is here < ftp://ftp.arcadetech.org/TTL/Test_Equipment/Fluke/9010%20Series/9010_Fixture%20PDFs/9000A-006%20Async%20Probe1.pdf>
on PDF page 23. Right now I get Signature 0000 Count 255
Matt
On 6/18/2018 11:42 PM, Matthew Rossiter wrote:
I believe there is an issue with the Async tape because program 10 is coming up as "Not Found" which happens to be the Delay Setup program needed to do the clock module self test. See PDF page 66 (or workbook page 88) in this workbook <
ftp://ttl.arcadetech.org/TTL/Test_Equipment/Fluke/9XXX%20Training%20and%20Troublshooting/9010A%20Training/9010A%20Student%20Workbook%20Course%20Notes-805663.pdf>.
All 20 programs work fine for me except program 10. Does anyone happen to have another copy of the Async tape they can share? Hopefully I'm not the only one that has one. :|
Matt
On 4/6/2018 4:15 PM, Tony Jones wrote:
On Fri, Apr 6, 2018, 4:02 PM John Robertson<jrr@flippers.com> wrote:
or Tony lets us know what actually does work.
I was hoping someone else had an idea :-)
- if I'm misinterpreting the resistor hookup instructions for self test - has a newer version of manual - or ......
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is:ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site:http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/