The 9100 is not a script-based system. Disregard anything you learned about scripting on the 9010, it's not transferable. Would you try to load Mac programs on a PC? Same sort of analogy here, 9010 stuff is a totally different system, they don't share anything. When you get a video card and keyboard, you will open up to the wonderful world of the TL/1 programming language which is far more powerful, and useful than any scripts :) Until then, do like I did for the first 4-5 years of being a 9100 owner, get trick with every function through the operators keypad. Yes you can use your 6502 pod with it, the image contains all pod libraries and software needed for any pod to be used on the system. It's an old but familiar piece of advice, but - read the manuals. Seriously do, you have to, to get your head round how it works, and how you can use it. Enjoy! Andrew Welburn (mobile) www.andys-arcade.com
On Dec 27, 2015, at 9:03 PM, tonyhtbsusa <tony@htbsusa.com> wrote:
I have a question I am new to the 9100a My fluke 9010a has serial and fide to make scripts and send them over to it Works great
I just upgraded my fluke 9100a to a sd to scsi adapter
http://www.codesrc.com/mediawiki/index.php?title=SCSI2SD#Alternative_Open_SC SI_Projects Upgraded roms from andys site http://www.andys-arcade.net/personal/tech/fluke9100/index.htm No keyboard no video card Flashed the sd card with 6.1 dd image on 256meg sd from andys site
v6.1 software and v6.1 editor . Its a bare-bones install of software and pod libraries, no user programs or UUT's provided.
9100a passes mem test and boots I Can do a self test with my 6502 pod and passes How do I get it to load and run a scrip ? Can I send data to it from fide over serial ? Can I make a script in fide and save it to disk ? and load it in 9100a if so how ? Am I missing something Tony Hi-tech
-----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Steve Larkins Sent: Tuesday, December 8, 2015 11:36 AM To: Technical Tools Mail List Subject: Re: [Techtoolslist] v6.1 dd image
I am running the image on an SD card using the scsi SD adapter made by that cleaver Australian guy linked to and spoken about on this very list.
Make sure you have updated the BIOS chip if you are using a 9100a as the early released did not support the software the later image was made from.
I sent John a dump of the latest firmware V1.3 for the 9100ft and it is on the FTP.
Andy has put together a brilliant resource on his website including the process to upgrade the ROMS.
Steve Larkins Mobile 07826 553792
On 8 December 2015 at 06:48, Tony Jones <tony@tonyjones.com> wrote:
On Mon, Dec 7, 2015 at 9:30 PM, Andrew Welburn <andy@andysarcade.net> wrote:
Not sure where you're getting the 100mb limit from?
http://www.andys-arcade.net/personal/tech/fluke9100/index.htm
task 13 ..... "and the fluke can't see anything above 100mb anyway!" _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/