Al, Do you have the ribbon cable in the test socket? If so, this is normal behavior. Martin. Sent from my iPhone On 29 Nov 2010, at 02:34, "AL SACCO_hm" <asacco007@hotmail.com> wrote:
HELP FOR FLUKE 9100 USER
Need some help on an issue that has happened during power up on multiple Fluke 9100a or ft units that I tested.... if no pod is attached to 9100 during it comes up "no pod connected"..... if any pod is attached it comes up "enabled line caused timeout" any idea or help would be helpful.....
AL SACCO _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/