Good point Rodger, I think that was hidden in the yada, yada part of the instructions for changing voltage that I didn't quote... Now to find the PDF of the 9010A manuals. They aren't up on the ftp site: ftp://ftp.flippers.com/TTL/Test%20Equipment/ the backup CD is buried somewhere in my shop... John :-#)# At 3:40 PM -0600 10/31/05, Rodger Boots wrote:
Be careful, a lot of times when you change voltage you also should change the fuse. In the case of the 9010A the line fuse should be 1A fast blow for 120 V and 1/2 A fast blow for 240 V.
Filip Hautekeete wrote:
Hello Steve, You are correct. Thanks to John Robertson I figured out there is a slide card for voltage selection behind the fuse panel. No need to drag the systems out of your garage ;-) Thanks for your help! Filip
Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist