Hmm... I actually have some lantronics units.. Would need to see if they have a VCP Driver ( Virtual Comm Port ) , most of them time there used like Telnet Devices, but any Ethernet->Serial that supports VCP would work. -----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of John Robertson Sent: Monday, August 11, 2014 5:07 PM To: techtoolslist@flippers.com Subject: Re: [Techtoolslist] Fluke 9010A - RS-232 & USB interface!! Further to this, here is a module that converts Rs-232 to Ethernet and vice-versa...worth looking into for the 9010 and 9100? Hope someone follows this up... http://www.tcp232.net/tcp-ip-to-serial-module John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/