Tim, The Red Socket was supplied in the Box new with the 68000 Pod, Its NOT a cheap Dual Wipe Socket (and cheap 64 pin ones are not cheap !!). Its got some nice contacts that mate really neatly with the pod pins, and has (Had) some fine'ish pins that plug into the turned pin sockets really well..... But like I said, it didn't like being removed !!! For a 64 Pin Zif Socket, I was looking at £35 or so I think..... I like the idea of using an IDC socket though..... but might be a killer with a 64 pin one..... I've not done too much homework on it yet though !! Cheers, Colin ----- Original Message ----- From: "Tim Matthews" <trmatthe@gmail.com> To: "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Tuesday, June 08, 2010 8:15 PM Subject: Re: [Techtoolslist] Fluke Pods to Turned Pin Sockets - Help !! Hi Col, I'm not sure which red adaptor you're talking about, but I made a pair of ZIF pin savers for my main Fluke pods. They are a ZIF socket wired to a length of ribbon cable and ended in an IDC style socket. I just soldered up the ribbon cable to the back of the ZIF (well, I mounted it on some veroboard) and then routed it through the IDC. It takes about 5 minutes of figuring out to make sure that you're not crossing pins between the ZIF and the IDC part and then it's just soldering. The benefit being that you insert the delicate Fluke pod into the ZIF socket, and then use the IDC as a sacrificial connector. If/when the pins on the IDC socket bend beyond repair, just un-clip the top, replace the socket (about £1.50 from Farnell for a 40 pin) and you're good to go. The 68k saver was a bit more tricky as it took me some time to find the right sized parts but it's guaranteed a lot cheaper/simpler than having to replace a pod header :) I've got pics somewhere I could look for and stick on the web somewhere. cheers tim On 8 June 2010 19:45, Colin Davies <colin.w.davies@btopenworld.com> wrote:
Is there a fairly cheap alternative to this RED socket , before I start making a fancy adaptor up using back to back sockets
and replaceable strips of pins...
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/