You can always paypal me a $20 bill and I can send you a working tested fan ...... Art -----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Tony Jones Sent: Thursday, July 14, 2016 2:11 PM To: John Robertson; Technical Tools Mail List Subject: Re: [Techtoolslist] 9010 fan question On Thu, Jul 14, 2016 at 10:43 AM, John Robertson <jrr@flippers.com> wrote:
Depending the fan design there may be a removable rubber seal under the fan label (if in the middle of the fan). I peel back the label, remove the seal and then put a couple of drops of synthetic motor oil (around 20W) and let it soak in a while then spin the fan manually back and forth to work the it back into the bushings. Then seal it back up.
No, not on this fan. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/