Having a look at the service manual I'm thinking it might need a new 6820 Pia chip... would I be along the right lines ? Cheers, Colin ----- Original Message ----- From: "Colin Davies" <colin.w.davies@btopenworld.com> To: <techtoolslist@flippers.com> Sent: Wednesday, September 24, 2008 1:18 AM Subject: [Techtoolslist] Fluke 9010a issue with pod self test
I just tried my new fluke 9010a with RS-232... passes self test... but when I plug a known working 6502 pod in and do a bus test it reports 6502 pod error 00 (iirc)....
Is this a relatively easy fix or should I bite the bullet and move the rs-232 module over to my working unit ? ( Is that all I have to do ? or are there other modifications required to the base unit to accept it ?)
I'd rather fix the faulty unit to be honest, as the worker is in really really great condition so I'd like to keep it as a spare and use the other new arrival for now.....
Thanks for your help, Regards, Colin _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment