Which B&K model do you have? I have made a simple adapter that I cut into the cable and straight wired the plug off an old tube onto. I have found that ALL our tubes (except the B&W) use the same plug if they are the large diameter. Thus with a small plug and a couple of permanent cables I can cover the tubes we are likely to run across. I use a jumper wire to connect the Red/Green/Blue cathodes to the B&W/Red wire for testing. These tubes all are in-line and all colours share the same G1 (& G2 is the same as well). John :-#)# At 03:33 PM 25/07/2002 -0500, Noel Johnson wrote:
I just learned to use my B&K. Could someone confirm that adapter 23 is used on Nintendo Sanyo monitors? I don't have the current setup list from B&K.
Thanks in advance!
Noel