Yes. This file will tell you what version OS you need and adapter too: http://fmbbowen.com:39353/VideoGames/DLH_DVDs/Test%20Equipment/Eprom%20Progr... With later versions of the OS, Data I/O added some form of protection so that it could not be copied. The only way to get a later version of the OS is to pay $300? I know this was discussed last summer/fall in RGVAC. At 11:00 AM 5/31/2005, Electronicamuse@aol.com wrote:
In a message dated 5/30/2005 7:05:11 PM Eastern Standard Time, martin@guddler.co.uk writes: which then allows you to go much higher than that (27C010 for instance
My question is if you have the correct adapter to use these larger EPROMs, don't you also have to have a later revision of the internal OS?
Dave
+++++Ask me about Retrocade 30-in-1 MultiPac kits for Midway Pac Man and Ms Pac Man boards and same kit already attached to a new JAMMA PCB. Also we now have purchased the rights to WG6100 (Tempest, etc) new deflection boards and HVU boards. Also HVU boards for Amplifone (Star Wars). These are version 2 with no extra wiring or mods necessary. Ask about Star Wars overlays and new cabinets for Midway cocktail, upright, mini, Dragon's Lair, Williams, Golden Tee Fore, and Ultra-MAME++++ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist
-- Franklin Bowen (Franklin@Bowen.net) http://fmbbowen.com:39353 _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist