Andre, You can also try SAMdisk which claims to be able to run on windows 2000 and newer version of the OS. I tied this utility back in April when my 9100 hard drive took a dirt nap and the software did work on XP. Unfortunately, the v6.0 TD0 disk images were bad and I never successfully installed from disks created using SAMdisk. http://simonowen.com/samdisk/ On 11/7/2012 11:33 AM, John Robertson wrote:
andre.huijts@upcmail.nl wrote:
OK guys, I found my not-so old NEC USB floppy drive and hooked it up to my Win XP laptop. Of course windows doesn't recognize the floppy. Now how do I make images so I can send them to John (and others) ?
I saw a German DOS tool for it I believe in one of the FTP directories is that what I need to use. Or is there any Windows tool that does a "blind" track by track floppy image. Because I do have tools for the Atari ST that can do that...IIRC :)
I assume Clonezilla is only good for doing Harddisk images and not floppies ?
Andre
Hi Andre,
Actually on the FTP site I think we have a program that will create floppy images regardless if it can 'read' the floppy - ah, just found it, in the wrong directory - teledisk.lzh. Uploading it to the 9100A section on the FTP site.
Look for it here:
ftp://ttl.arcadetech.org/Test_Equipment/Fluke/9100A
I just renamed the directory "Test Equipment" to "Test_Equipment" to make it easier to type in that those darn %20s!
Dumper.zip is also of interest to some folks (9010A crowd) - was in 9100A directory (now moving to 9010A directory).
"This program will take the operator input for the begining & ending memory locations (in hex) then send ASCII formatted text out the 232 port to the host computer."
John :-#)#
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org Archive site: http://seven.pairlist.net/pipermail/techtoolslist/