On 03/16/2015 1:49 PM, Fabrizio Vasile wrote:
Il 16/03/2015 21:33, Clay Cowgill ha scritto:
I was aware of this possibility of dumping PLD like a normal EPROM but there could be issue with some programmers. Shouldn't be. It's a five volt part and since you're not writing data to the part the lack of OE shouldn't be an issue. (I suppose if you were particularly concerned you could just buffer the output pins with a '244 connected to the 2716's CE's and OE.)
/*I mean the programmer you are going to use for dumping a PLD as EPROM must *//**//*actually drive the pins both high and low for this to work.Some programmers only drive LOW the pins and use pull-up resistors to force them HIGH.
Anyway, like Charles MacDonald explain here:
http://dreamjam.co.uk/emuviews/old2009.php
you can also read a PAL as a 27C020 EPROM using this simple adapter:
http://dreamjam.co.uk/emuviews/temp/adapter2.png
*//*/*You will get a 256KB dump that can be analized with his analysing software in order to recompile equations in a GAL16V8 replacement*/ */
-Clay
Did anyone ever do the dump of the PALs for the Track Pack version of OFFROAD? I have a board in the shop now that I am hoping to be able to fix for a customer. Either that or MAME a replacement into his cabinet, not sure if that would work with three steering wheels, but I suspect the Raspberry Pi may be up to it as a single emulation... John :-#)# -- How to subscribe or unsubscribe from TTL http://seven.pairlist.net/mailman/listinfo/techtoolslist