3 Jan
2010
3 Jan
'10
7:50 p.m.
Ok the holidays are over, and I'm back to trying to get my Fluke hooked up to the computer so I can do scripts. Problem I'm having is that when I enter the following Aux/if , Read , Yes the fluke resets after 1-2 secs. It will also do this with the serial port unplugged. I'm wondering if the is a normal action, like the Fluke is looking for a signal from the com port to wait, or if there is a problem with my fluke.. Thanks, Kevin _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/