No problem, I did a large run of the piero's usb boards for people, I don't think he has any of the pcb(s) left, if he is interested in releasing the board layout files I can always order some from a US distributor and make some more. As for control software other than FIDE I do not know, I know I have seen the 9020A with the RS232 card but no idea how it can be used without the Aux I/F, Prog and Exec Buttons -----Original Message----- From: Techtoolslist [mailto:techtoolslist-bounces@flippers.com] On Behalf Of Andy Smout Sent: Tuesday, March 17, 2015 4:37 PM To: techtoolslist@flippers.com Subject: Re: [Techtoolslist] Fluke 9020A troubleshooter - swapping ieee488 i/f for rs232 i/f No AUX I/F, Program or Execute Buttons on this one. and thanks for the offer of the rs232 card! i'll followup later on that. _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/ _______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com https://pairlist7.pair.net/mailman/listinfo/techtoolslist FTP site is: ftp://ttl.arcadetech.org/TTL/Test_Equipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/