Ahhh.... Is this partly what the big custom is for next to CPU 1 ? - I see its got a number of Chip Selects that mostly go to the bottom board..... Not sure what else it does though, maybe it does blits and things too ?? So far, the CPU 1 Eproms and Rams appear to be 'hard wired memory mapped' , so at least I can get at them initially.... ( I've not looked if the 2nd 68000 shared memory is hard wired yet though ) Its also possible (well I did a quick test and it worked for me) to just run tests on the top board on its own..... obviously you are Blind here..... I'm learning as I go.... If the stuff (maybe on the bottom board) is dynamic, then I'd hope that if you got the top board initially running the code, then it sets up the map for you....and you just prod away at it then..... I do agree that they are indeed a PIG though.... Cheers, Colin ----- Original Message ----- From: "Andrew Welburn" <andy@andysarcade.net> To: <jrr@flippers.com>; "Technical Tools Mail List" <techtoolslist@flippers.com> Sent: Thursday, June 10, 2010 8:36 AM Subject: Re: [Techtoolslist] Fluke 9010a 68000 Pod Eprom TestingonOutrun-help please !!
Outrun is a pig, and i have not recently tried to work it all out, it has a dynamic memory map.
You ned to plug the memory mapper with a bunch of values to put the ram/rom in the releavant memory locations. I messed around with this, but i still couldn't get it to play ball and gave up...
_______________________________________________ Techtoolslist mailing list Techtoolslist@flippers.com http://seven.pairlist.net/mailman/listinfo/techtoolslist FTP site is: ftp://ftp.flippers.com/TTL/TestEquipment Archive site: http://seven.pairlist.net/pipermail/techtoolslist/